Kenwood VGS 1 Manual

The Kenwood VGS 1 is a high-performance video graphics system designed for professional and home use, featuring advanced video processing capabilities, multiple input/output options, and user-friendly controls. This manual covers essential information for setup, operation, maintenance, and troubleshooting of your Kenwood VGS 1 system.

Features at a Glance

Key components: Advanced video processor, multiple input ports, remote control, front panel controls, various connectivity options.

Feature	Description
Video Inputs	Composite, S-Video, Component, HDMI
Video Outputs	Composite, S-Video, Component, HDMI
Audio Inputs	RCA stereo, Optical digital
Audio Outputs	RCA stereo, Optical digital
Processing	Up to 1080p resolution support
Controls	Front panel buttons, IR remote control
Power	AC 100-240V, 50/60Hz
Dimensions	Standard rack mount size
Cooling	Quiet fan system
Indicators	LED status lights

Installation

Unpack and inspect all components. Ensure proper ventilation and stable placement.

1. Position unit: Place on stable surface with adequate ventilation space.
2. Connect video sources: Use appropriate cables for each input device.
3. Connect audio: Route audio cables to amplifier or speakers.
4. Connect output: Route video output to display device.
5. Plug into AC power source.

WARNING! Ensure proper ventilation to prevent overheating. Keep away from moisture and direct sunlight.

First-Time Setup

Power on the system and configure initial settings.

1. Power connection: Connect to AC power and turn on main switch.
2. Input selection: Use INPUT button to select primary video source.
3. Output configuration: Set output resolution matching your display.
4. Audio setup: Configure audio output settings.
5. Save settings: Store configuration in memory.

CAUTION! Allow system to stabilize for 5 minutes after first power-on.

Specifications

• Video Inputs: Composite, S-Video, Component, HDMI
• Video Outputs: Composite, S-Video, Component, HDMI
• Resolution Support: Up to 1080p
• Audio Inputs: RCA stereo, Optical digital
• Audio Outputs: RCA stereo, Optical digital
• Power Requirements: AC 100-240V, 50/60Hz
• Power Consumption: 45W maximum
• Operating Temperature: 5°C to 35°C
• Dimensions: 430mm (W) x 350mm (D) x 88mm (H)
• Weight: 4.5 kg

Controls and Settings

Front panel controls: POWER, INPUT SELECT, MENU, ENTER, UP/DOWN arrows. Remote control: All front panel functions plus additional features.

Menu System: Video settings (brightness, contrast, color, sharpness), Audio settings (balance, tone), System settings (language, reset), Input/output configuration.

Advanced settings: Color temperature, gamma correction, noise reduction, aspect ratio controls.

Connecting Devices

Multiple input options for various video sources.

1. Turn off all devices before making connections.
2. Use high-quality cables for best performance.
3. Match input/output types (composite to composite, HDMI to HDMI).
4. Secure all connections firmly.
5. Power on devices in sequence: source first, then processor, then display.

Tip: Use shortest possible cable lengths to maintain signal quality.

Operation Modes

Various operating modes for different applications.

1. Direct mode: Pass-through with minimal processing.
2. Enhanced mode: Video enhancement algorithms active.
3. Custom mode: User-defined settings profile.
4. Memory recall: Store and recall up to 3 custom settings.
5. Bypass mode: Direct connection for critical applications.

Note: Allow 30 seconds for mode changes to stabilize.

Advanced Features

Professional features for specialized applications.

• Picture-in-picture capability
• Frame synchronization
• Color space conversion
• Scan rate conversion
• Test pattern generation
• RS-232 control interface
• Macro programming

Care & Maintenance

Regular maintenance ensures optimal performance.

1. Clean exterior with dry, soft cloth only.
2. Ensure ventilation ports remain unobstructed.
3. Check connections periodically for tightness.
4. Update firmware when available.
5. Store in dry, dust-free environment when not in use.

CAUTION! Never use liquid cleaners or compressed air. Unplug before cleaning.

Regulatory Information

FCC Part 15 Class B compliant. CE marked. RoHS compliant. Manufactured under ISO 9001 quality standards. Copyright © Kenwood Corporation. All trademarks are property of their respective owners. For technical support, contact Kenwood customer service at [email protected] or visit www.kenwood.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cable disconnected	Check power connection and outlet
No video output	Input selection incorrect	Select correct input source
Poor video quality	Cable issues or settings	Check cables and adjust video settings
No audio	Audio cables or settings	Verify audio connections and settings
Remote not working	Batteries or obstruction	Replace batteries and ensure line of sight
Overheating	Ventilation blocked	Ensure adequate ventilation space
Intermittent operation	Loose connections	Check and secure all cables

Reset Procedure: Hold MENU and POWER buttons for 10 seconds to factory reset.

Service: Contact authorized Kenwood service center for repairs.