Kenwood VR 206 Manual

The Kenwood VR 206 is a high-performance audio/video receiver with Dolby Digital and DTS decoding, 6-channel amplification, multiple audio/video inputs, digital optical/coaxial inputs, AM/FM tuner, remote control, on-screen display, and various sound modes. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 6-channel amplifier, Dolby Digital/DTS decoder, Remote Control, Multiple A/V inputs, Digital optical/coaxial inputs, Speaker terminals, AM/FM antenna terminals.

Feature	Description
Power output	100W per channel (6 channels)
Audio decoding	Dolby Digital, DTS, Pro Logic
Video inputs	Composite, S-Video, Component
Digital inputs	Optical and coaxial
Speaker terminals	For 5.1 channel speaker setup
Tuner	AM/FM with 40 station presets
Remote control	Full system control
On-screen display	Menu navigation and setup
Sound modes	Hall, Theater, Stadium, etc.
Headphone jack	For private listening

Installation

Unpack and inspect contents. Place in well-ventilated area.

1. Connect speakers: Match polarity (+/-) for all channels.
2. Connect audio sources: Use appropriate input jacks for CD, DVD, etc.
3. Connect video sources: Use composite, S-Video, or component inputs.
4. Connect antennas: AM loop and FM wire antennas.
5. Plug into AC power.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen prompts.

1. Speaker setup: Configure speaker sizes and distances.
2. Input assignment: Assign sources to specific inputs.
3. Tuner setup: Auto-scan and store radio stations.
4. Sound calibration: Use test tone for level matching.
5. Set preferences: Language, display options, etc.

CAUTION! Turn off power before making connections. Check all wiring.

Specifications

• Power Output: 100W x 6 (8 ohms, 20Hz-20kHz)
• Total Harmonic Distortion: 0.08%
• Frequency Response: 10Hz-100kHz
• Signal-to-Noise Ratio: 100dB
• Inputs: 6 audio, 4 video, 2 digital
• Outputs: 6 speaker, subwoofer, record out
• Tuner: AM/FM with RDS
• Dimensions: 440mm x 151mm x 379mm
• Weight: 10.5kg
• Power Consumption: 450W

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, TUNER PRESETS, HEADPHONE JACK.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, TUNER, SOUND MODE, MENU, NAVIGATION buttons.

Audio Settings: Bass, Treble, Balance, Loudness. Video Settings: Brightness, Contrast (for OSD). Speaker Settings: Size, Distance, Level. Tuner Settings: Presets, Auto-scan. System Settings: Language, Display, Reset.

Connecting Devices

Audio Sources: CD player, turntable, tape deck. Video Sources: DVD player, game console, cable box.

1. Turn off receiver and devices before connecting.
2. Use appropriate cables for each source type.
3. Connect digital sources to optical/coaxial inputs.
4. Assign inputs in setup menu.
5. Connect speakers observing polarity.

Tip: Use high-quality cables for best performance.

Audio/Video Operation

Supports various audio formats and video sources.

1. Select input: Press INPUT SELECT for desired source.
2. Adjust volume: Use VOLUME control or remote.
3. Select sound mode: Choose from available presets.
4. Tuner operation: Tune stations and store presets.
5. Recording: Use record outputs for tape recording.

WARNING! Do not exceed maximum volume levels to protect speakers.

Sound Modes

Various DSP modes for different listening environments.

• Hall: Simulates concert hall acoustics
• Theater: Movie theater sound experience
• Stadium: Outdoor stadium ambiance
• Dolby Pro Logic: Matrix surround decoding
• 5CH Stereo: Stereo sound from all speakers

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; avoid chemicals.

Keep unit clean and dust-free. Ensure proper ventilation. Check connections periodically.

CAUTION! Do not use liquid cleaners. Keep away from moisture and heat sources.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European compliance. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet.
No sound	Speaker connections/mute	Check speaker wires; ensure not muted.
Poor radio reception	Antenna placement	Reposition antennas; check connections.
Remote not working	Batteries/obstructions	Replace batteries; ensure line of sight.
Overheating	Ventilation blocked	Ensure adequate ventilation around unit.

Reset: Disconnect power for 5 minutes then reconnect.

Service: Contact authorized Kenwood service center.