Kenwood VR 207 Manual

The Kenwood VR 207 is a 5.1 channel AV receiver with Dolby Digital and DTS decoding, 100W per channel output, multiple audio/video inputs, AM/FM tuner with 40 presets, digital optical/coaxial inputs, remote control, on-screen display, and various sound modes. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 5.1 channel amplifier, remote control, multiple audio/video inputs, digital inputs, speaker terminals, AM/FM antenna terminals.

Feature	Description
Power Output	100W per channel (front), 25W (center/surround)
Audio Decoding	Dolby Digital, DTS, Pro Logic
Inputs	4 audio/video, 2 digital (optical/coaxial)
Tuner	AM/FM with 40 station presets
Speaker Terminals	Front, center, surround outputs
Remote Control	Full function remote with learning capability
On-Screen Display	Menu navigation and setup
Sound Modes	DSP modes: Hall, Theater, Stadium
Headphone Jack	3.5mm for private listening
AC Power	120V AC, 60Hz operation

Installation

Unpack and inspect contents. Place on stable, well-ventilated surface.

1. Connect speakers: Match polarity (+/-) for front, center, surround speakers.
2. Connect audio sources: Use audio/video inputs for DVD, VCR, or other devices.
3. Connect digital sources: Use optical/coaxial inputs for digital audio.
4. Connect antennas: Attach AM loop and FM wire antennas.
5. Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen display prompts.

1. Speaker setup: Configure speaker size and distance in menu.
2. Input assignment: Assign inputs to specific sources (DVD, TV, etc.).
3. Tuner setup: Auto-scan for AM/FM stations.
4. Sound calibration: Use test tone for proper level setting.
5. Remote setup: Program remote for other devices if needed.

CAUTION! Ensure all connections are secure before powering on.

Specifications

• Power Output: 100W x 2 (front), 25W x 3 (center/surround)
• Total Harmonic Distortion: 0.08%
• Frequency Response: 20Hz - 20kHz
• Signal-to-Noise Ratio: 95dB
• Input Sensitivity: 200mV
• Digital Inputs: 1 optical, 1 coaxial
• Audio/Video Inputs: 4 sets
• Tuner Presets: 40 stations (AM/FM)
• Power Consumption: 280W
• Dimensions: 17.1" W x 5.9" H x 14.6" D

Controls and Settings

Access OSD via remote or front panel buttons. Front Panel: POWER, INPUT SELECT, VOLUME, TUNER, SOUND MODE.

Remote: POWER, Numeric buttons, INPUT SELECT, VOLUME, MUTE, MENU, TUNER, DSP MODE, TEST TONE.

Audio: Bass, treble, balance, loudness. Speaker: Size (large/small), distance, level. Input: Name assignment, digital input selection. Tuner: Auto/manual tuning, preset memory. System: OSD language, remote codes, factory reset.

Connecting Devices

Audio/Video: Use composite or component connections. Digital: Optical/coaxial for digital audio.

1. Turn off receiver and devices before connecting.
2. Match cable colors (red/white audio, yellow video).
3. Assign inputs in menu for proper source selection.
4. Connect speakers ensuring proper polarity.

Tip: Use high-quality cables for best audio/video performance.

Sound Modes

Various DSP modes for enhanced listening experience.

1. Dolby Digital: 5.1 channel surround sound.
2. DTS: Digital Theater System decoding.
3. Pro Logic: Matrix surround for stereo sources.
4. DSP Modes: Hall, Theater, Stadium, Jazz Club.
5. Direct: Bypass all processing for pure sound.
6. Night Mode: Compresses dynamic range for late-night viewing.

Note: Some modes only work with specific source material.

Tuner Operation

AM/FM tuner with 40 station presets.

1. Auto tuning: Press and hold TUNER +/- for automatic station search.
2. Manual tuning: Press TUNER +/- briefly for manual station selection.
3. Preset memory: Store stations in numbered presets (1-40).
4. Preset recall: Use numeric buttons or PRESET +/- to select stored stations.
5. Stereo/Mono: Auto switches to mono for weak FM signals.

Tip: Position antennas for best reception before storing presets.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. Compressed air for vents.

CAUTION! Do not use liquid cleaners. Keep away from moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet.
No sound	Speaker connections/mute	Check speaker wires; ensure not muted; verify input selection.
Remote not working	Batteries/obstruction	Replace batteries; point directly at sensor; remove obstacles.
Poor tuner reception	Antenna placement	Reposition antennas; check connections.
No video	Input selection/cables	Verify input selection; check video cable connections.
Overheating	Ventilation blocked	Ensure proper ventilation; clear vents of dust.

Reset: Menu > System > Factory Reset if available.

Service: Contact authorized Kenwood service center.