Kenwood VR 616 Manual

The Kenwood VR 616 is a high-performance audio/video receiver featuring Dolby Digital and DTS decoding, 6-channel amplification, multiple audio/video inputs, digital optical/coaxial inputs, AM/FM tuner, remote control, and advanced surround sound processing. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 6-channel amplifier, Dolby Digital/DTS decoder, multiple input/output terminals, remote control, AM/FM tuner.

Feature	Description
Power Output	100W per channel (6 channels)
Audio Decoding	Dolby Digital, DTS, Pro Logic
Inputs	6 audio/video, 2 digital optical, 1 coaxial
Outputs	6-channel speaker, subwoofer, video monitor
Tuner	AM/FM with 30 station presets
Remote Control	Full-function learning remote
Video Conversion	Composite to S-Video upconversion
Surround Modes	5.1 channel, stereo, direct
Display	Fluorescent display with dimmer
Power Requirements	120V AC, 60Hz

Installation

Unpack and inspect contents. Place in well-ventilated area.

1. Connect speakers: Match polarity (+/-) for front, center, surround channels.
2. Connect subwoofer: Use LFE or line-level output.
3. Connect source devices: DVD, CD, VCR, cable/satellite boxes to appropriate inputs.
4. Connect TV/monitor: Use video output to display on-screen menus.
5. Plug into AC power.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

1. Speaker configuration: Set speaker sizes (large/small), distances, levels.
2. Input assignment: Assign digital/analog inputs to source components.
3. Tuner setup: Auto-program AM/FM stations.
4. Surround mode: Select default listening mode (Dolby Digital, DTS, etc.).
5. Test tones: Use built-in test tone generator for speaker balancing.

CAUTION! Turn volume down before initial power-on to prevent damage.

Specifications

• Power Output: 100W x 6 (8 ohms, 20Hz-20kHz)
• Total Harmonic Distortion: 0.08%
• Frequency Response: 10Hz-100kHz (+1/-3dB)
• Signal-to-Noise Ratio: 100dB
• Digital Inputs: 2 optical, 1 coaxial
• Analog Inputs: 6 audio/video pairs
• Video Inputs: 3 composite, 2 S-Video
• Speaker Impedance: 6-16 ohms
• Power Consumption: 450W maximum
• Dimensions: 17-1/8" W x 6-3/4" H x 15-3/4" D

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, TONE, SURROUND MODE, HEADPHONE JACK.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, NUMERIC, MENU, TUNER PRESETS.

Audio: Bass, treble, balance, loudness, night mode. Video: Input selection, video conversion. Tuner: Auto/manual tuning, preset memory. System: Speaker configuration, delay settings, test tones. Surround: Dolby Digital, DTS, Pro Logic, stereo, direct.

Connecting Devices

Audio/Video: Use composite or S-Video cables. Digital: Optical or coaxial for best quality.

1. Turn off all components before connecting.
2. Match audio/video cables (red/white for audio, yellow for video).
3. For digital sources, connect optical or coaxial cables.
4. Assign inputs in setup menu for proper source identification.

Tip: Use high-quality cables for best audio/video performance.

Audio/Video Operation

Supports multiple audio formats and surround modes.

1. Select input: Press INPUT SELECT for desired source.
2. Adjust volume: Use VOLUME control or remote.
3. Select surround mode: Choose Dolby Digital, DTS, Pro Logic, or stereo.
4. Tuner operation: Tune AM/FM stations, store presets.
5. Headphone use: Plug into front panel jack for private listening.
6. Mute: Press MUTE to temporarily silence audio.

WARNING! Do not operate at maximum volume for extended periods.

Advanced Features

Digital Signal Processing: Multiple DSP modes for different content. Night Mode: Compresses dynamic range for late-night viewing. Learning Remote: Can be programmed to control other components.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; avoid liquids.

CAUTION! Keep away from moisture and heat sources. Ensure proper ventilation.

Regulatory Information

FCC Part 15: Class B digital device compliant. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet.
No sound	Input selection/volume	Verify input selection; check volume level; ensure mute is off.
No video	Cables/input	Check video connections; verify input selection.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear path to sensor.
Poor radio reception	Antenna/placement	Extend FM antenna; reposition for better reception.
Overheating	Ventilation	Ensure adequate ventilation; clear vents of obstructions.

Reset: Disconnect power for 30 seconds, then reconnect.

Service: Contact authorized Kenwood service center for repairs.