kenwood vr 707 manual

The Kenwood VR-707 is a high-performance audio/video receiver featuring Dolby Digital and DTS decoding, multiple audio/video inputs, AM/FM tuner, digital sound field processing, multi-room capability, and comprehensive connectivity options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit with digital processing, Remote Control, Speaker terminals, Multiple audio/video inputs, AM/FM antenna terminals, Multi-room output.

Feature	Description
Dolby Digital/DTS Decoding	5.1 channel surround sound processing
Multi-room capability	Audio distribution to secondary zones
AM/FM Tuner	40 station presets with RDS
Audio Inputs	Multiple analog and digital inputs
Video Inputs	Composite, S-Video, Component video
Speaker Terminals	5.1 channel speaker outputs
Remote Control	Multi-function learning remote
Digital Sound Field	Multiple DSP modes for different content
Power Output	100W per channel (front), 70W (center/surround)
AC Power Input	120V AC, 60Hz operation

Installation

Unpack and inspect contents. Place in well-ventilated area.

1. Connect speakers: Match polarity (+/-) for all speakers.
2. Connect audio sources: Use appropriate input jacks for CD, DVD, etc.
3. Connect video sources: Use composite, S-video, or component inputs.
4. Connect antennas: AM loop and FM wire antennas.
5. Plug into AC power.

WARNING! Ensure proper ventilation; do not block heat sinks. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen display or front panel indicators.

1. Speaker setup: Configure speaker sizes and distances in menu.
2. Input assignment: Assign sources to appropriate inputs.
3. Tuner setup: Auto-scan for AM/FM stations.
4. Sound calibration: Use test tone for level matching.
5. Multi-room setup: Configure zone 2/3 outputs if used.

CAUTION! Ensure all connections are secure before powering on.

Specifications

• Power Output: 100W x 2 (front), 70W (center/surround)
• Audio Decoding: Dolby Digital, DTS, Pro Logic
• Inputs: 6 audio, 4 video, 2 digital (optical/coaxial)
• Outputs: 5.1 channel, tape monitor, multi-room
• Tuner: AM/FM with RDS, 40 presets
• Frequency Response: 20Hz-20kHz
• Signal-to-Noise: 100dB
• Power Requirements: 120V AC, 60Hz
• Dimensions: Standard component width

Controls and Settings

Access menu via front panel or remote control. Front Panel: POWER, INPUT SELECT, VOLUME, TUNER PRESETS.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, TUNER, SETUP MENU.

Audio Settings: Bass, Treble, Balance, Loudness, DSP modes. Video Settings: Input assignment, output resolution. Tuner: Preset memory, auto scan. System: Speaker configuration, multi-room setup.

Connecting Devices

Audio: CD player, turntable, tape deck. Video: DVD player, cable box, gaming console.

1. Turn off all components before connecting.
2. Use appropriate cables for each source type.
3. Assign inputs in receiver menu.
4. Connect speakers with proper polarity.

Tip: Use high-quality cables for best audio/video performance.

Audio/Video Operation

Supports multiple surround formats and input sources.

1. Select input: Choose source with INPUT SELECT.
2. Adjust volume: Use VOLUME control or remote.
3. Select surround mode: Choose DSP mode for content type.
4. Tuner operation: Tune stations and store presets.
5. Tape monitoring: Use for recording and playback.

WARNING! Do not operate at maximum volume for extended periods.

Multi-Room Features

Zone 2/3 audio output for whole-house audio distribution.

1. Connect speakers to multi-room outputs.
2. Configure in system setup menu.
3. Select source for each zone independently.
4. Control volume per zone.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; avoid liquids.

CAUTION! Keep away from moisture and heat sources. Ensure proper ventilation.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; verify outlet function.
No sound	Speaker connections/mute	Check speaker wires; ensure not muted; verify input selection.
Poor reception	Antenna placement	Reposition antennas; check connections.
Remote not working	Batteries/obstructions	Replace batteries; ensure line of sight to sensor.
Overheating	Ventilation blockage	Ensure adequate ventilation space around unit.

Reset: Disconnect power for 30 seconds to reset microprocessor.

Service: Contact authorized Kenwood service center for repairs.