Kenwood VR 806 Manual

The Kenwood VR 806 is a high-performance AV receiver featuring Dolby Digital and DTS decoding, 6-channel amplification, multiple audio/video inputs, AM/FM tuner, digital optical/coaxial inputs, speaker setup calibration, and remote control. With 80 watts per channel, it delivers immersive home theater audio for various entertainment sources. Below are key sections covering setup, operation, features, and troubleshooting.

Features at a Glance

Key components: 6-channel amplifier, Dolby Digital/DTS decoder, AM/FM tuner, remote control, multiple audio/video inputs, digital inputs, speaker terminals.

Feature	Description
Power Output	80W per channel (6 ohms, 1kHz)
Audio Decoding	Dolby Digital, DTS, Pro Logic
Inputs	4 audio/video, 2 digital optical, 1 coaxial
Tuner	AM/FM with 30 station presets
Speaker Outputs	Front L/R, Center, Surround L/R, Subwoofer
Remote Control	Full-function remote included
Setup Microphone	Auto speaker calibration
Display	Fluorescent display with dimmer
Headphone Jack	3.5mm stereo headphone output
Power Consumption	280W maximum

Installation

Unpack and inspect contents. Place in well-ventilated area.

1. Connect speakers: Match polarity (+/-) to speaker terminals.
2. Connect audio sources: Use audio inputs for CD, DVD, etc.
3. Connect video sources: Use video inputs for TV, gaming consoles.
4. Connect digital sources: Use optical/coaxial for digital audio.
5. Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow setup procedure.

1. Speaker setup: Use auto calibration or manual configuration.
2. Input assignment: Assign sources to appropriate inputs.
3. Tuner setup: Auto-scan AM/FM stations.
4. Audio settings: Adjust bass, treble, balance.
5. Video settings: Configure video output options.

CAUTION! Disconnect power before making connections. Ensure stable placement.

Specifications

• Amplifier Section: 6 channels, 80W per channel (6 ohms)
• Frequency Response: 10Hz - 100kHz (+1/-3dB)
• Signal-to-Noise Ratio: 100dB (line input)
• Total Harmonic Distortion: 0.08% (1kHz)
• Input Sensitivity: 200mV (line), 2.5mV (MM phono)
• Digital Inputs: 2 optical, 1 coaxial
• Analog Inputs: 4 audio/video, phono, tape
• Outputs: 6 speaker, subwoofer, tape record, video monitor
• Power Requirements: AC 120V, 60Hz
• Dimensions: 440mm W × 415mm D × 151mm H

Controls and Settings

Front Panel: POWER, INPUT SELECTOR, VOLUME, TONE CONTROLS, HEADPHONE JACK.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, TUNER PRESETS, SURROUND MODES, SETUP.

Audio: Bass, treble, balance, loudness, surround modes. Video: Output resolution, aspect ratio. Tuner: AM/FM selection, auto/manual tuning, presets. System: Speaker configuration, delay settings, test tones.

Connecting Devices

Audio: CD player, turntable, tape deck. Video: DVD player, gaming console. Digital: TV, streaming devices.

1. Turn off receiver before connecting devices.
2. Use appropriate cables for each source.
3. Assign inputs in setup menu.
4. Select source via INPUT selector.

Tip: Use high-quality cables for best performance. Keep cables organized.

Audio Modes

Supports various surround sound and audio processing modes.

1. Dolby Digital: For 5.1 channel digital sources.
2. DTS: Digital Theater Systems decoding.
3. Pro Logic: For matrixed surround sound.
4. Stereo: 2-channel audio.
5. Direct: Bypasses tone controls.
6. Night Mode: Reduces dynamic range.

Note: Select appropriate mode for source material. Use test tones for level matching.

Tuner Operation

AM/FM tuner with 30 station presets.

1. Select AM or FM band.
2. Auto-scan or manual tune stations.
3. Store stations to presets (1-30).
4. Recall presets with numeric buttons.
5. Adjust tuner sensitivity if needed.

Tip: Use external antenna for better reception. Position antenna for optimal signal.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth. Avoid liquids and aerosols.

CAUTION! Do not block ventilation openings. Keep away from moisture and heat sources.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European markets. Manufactured under license from Dolby Laboratories. DTS and DTS Digital Surround are registered trademarks. For support, visit www.kenwood.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord, outlet	Check power connection; try different outlet.
No sound	Input selection, volume	Verify input selection; check volume level; ensure speakers connected.
Distorted sound	Speaker wires, settings	Check speaker connections; verify impedance matching; reset tone controls.
Remote not working	Batteries, obstruction	Replace batteries; ensure line of sight to IR sensor.
Poor tuner reception	Antenna, location	Check antenna connection; reposition antenna; scan stations.

Reset: Disconnect power for 5 minutes to reset microprocessor.

Service: Contact authorized Kenwood service center for repairs.