Kenwood VRS 6100 Manual

The Kenwood VRS 6100 is a high-performance home theater receiver featuring Dolby Digital and DTS decoding, multiple audio/video inputs, AM/FM tuner, 100W per channel output, digital optical/coaxial inputs, component video switching, remote control, on-screen display, bass management, and various sound modes. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Setup 8. Radio Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with built-in amplifier, Remote Control, Speaker terminals, Audio/Video inputs, Digital inputs, AM/FM antenna terminals.

Feature	Description
Power output	100W per channel (front), 50W (center/surround)
Audio decoding	Dolby Digital, DTS, Pro Logic II
Digital inputs	Optical and coaxial for digital audio sources
Video inputs	Component, composite, S-Video
Speaker terminals	For 5.1 channel speaker setup
AM/FM tuner	With 30 station presets
Remote control	Full system control with learning capability
On-screen display	Menu navigation and setup
Sound modes	Hall, Theater, Stadium, Jazz Club
Headphone jack	For private listening

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Match polarity (+/-) for front, center, surround speakers.
Connect audio sources: Use analog/digital inputs for CD player, DVD player, etc.
Connect video sources: Use component/composite inputs for TV, gaming consoles.
Connect antennas: AM loop and FM wire antennas to respective terminals.
Plug into AC power.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

Speaker setup: Configure speaker sizes, distances, and levels.
Input assignment: Assign digital/analog inputs to source components.
Radio presets: Auto-scan and store AM/FM stations.
Sound calibration: Use test tone for speaker level adjustment.
Remote setup: Program remote for other components.

CAUTION! Disconnect power before making connections. Ensure secure wiring.

Specifications

Power Output: 100W x 2 (front), 50W x 3 (center/surround)
Total Harmonic Distortion: 0.08%
Frequency Response: 20Hz - 20kHz
Signal-to-Noise Ratio: 100dB
Inputs: 4 analog audio, 3 digital (2 optical, 1 coaxial), 3 video composite
Outputs: 5.1 channel speaker, subwoofer, tape monitor
Tuner: AM/FM with RDS
Power Consumption: 280W max
Dimensions: 17.1" W x 6.4" H x 15.7" D
Weight: 22 lbs

Controls and Settings

Access OSD via MENU button. Front Panel: POWER, VOLUME, INPUT SELECT, TONE, SPEAKERS A/B.

Remote: POWER, Numeric buttons, INPUT SELECT, VOLUME, MUTE, MENU, SETUP, SOUND MODE.

Audio: Bass, Treble, Balance, Loudness, Night mode. Video: Input source selection, OSD settings. Tuner: Preset memory, auto scan, manual tuning. System: Speaker configuration, input rename, factory reset.

Connecting Devices

Audio: Analog/digital inputs. Video: Component/composite inputs. Speakers: 5.1 channel terminals.

Turn off receiver and devices before connecting.
Match cable types to appropriate inputs (digital optical to optical input).
Connect speakers ensuring correct polarity.
Select input via INPUT SELECTOR (CD, DVD, TV, etc.).

Tip: Use high-quality cables for best audio/video performance.

Audio Setup

Supports various audio formats and surround sound modes.

Select input: Choose source (DVD, CD, etc.)
Sound mode: Press SOUND MODE for Hall, Theater, Stadium, Jazz Club.
Volume control: Use VOLUME knob or remote.
Bass/Treble: Adjust tone controls as needed.
Balance: Adjust left/right speaker balance.
Night mode: Compresses dynamic range for late-night listening.

WARNING! Avoid excessive volume to prevent hearing damage and speaker damage.

Radio Operation

AM/FM tuner with 30 station presets and RDS.

Select band: Press AM/FM to choose band.
Tune stations: Use TUNING buttons or auto-scan.
Store presets: Tune to station, press and hold preset button.
Recall presets: Press numbered preset buttons.
RDS: Displays station information when available.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; no liquids or chemical cleaners.

CAUTION! Keep away from moisture and heat sources. Ensure proper ventilation during operation.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; ensure outlet works; check fuse.
No sound	Speaker connections/mute	Check speaker wires; ensure not muted; verify input selection.
Distorted sound	Volume/speakers	Reduce volume; check speaker impedance; inspect cables.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear path to IR sensor.
No radio reception	Antenna/position	Check antenna connections; reposition antennas for better reception.

Reset: Menu > System > Factory Reset if available.

Service: Contact authorized Kenwood service center; www.kenwood.com