Kenwood Washing Machine User Manual

The Kenwood Washing Machine is a high-efficiency front-loading appliance with multiple wash programs, energy-saving features, digital display, child lock, delay start, spin speed control, and temperature settings. Designed for household use with capacity for 7kg laundry, it features stainless steel drum, LED display, various wash cycles, and safety mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating Wash Cycles 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, stainless steel drum, detergent dispenser, water inlet valves, drain pump, door lock mechanism, and adjustable feet.

Feature	Description
Digital Display	Shows cycle time, temperature, and settings
Wash Programs	Cotton, Synthetic, Delicate, Quick Wash, etc.
Spin Speed Control	Adjustable from 400 to 1200 RPM
Temperature Settings	Cold, 30°C, 40°C, 60°C, 90°C
Child Lock	Prevents accidental program changes
Delay Start	Program start up to 24 hours later
Energy Rating	A+++ for maximum efficiency
Water Inlet	Hot and cold water connections
Drain Hose	For water discharge
Detergent Dispenser	Compartments for pre-wash, main wash, softener

Installation

Unpack and inspect contents. Place on level floor near water and power sources.

Remove transit bolts: Locate and remove all transit bolts from rear panel.
Level the machine: Adjust feet until machine is stable and level.
Connect water supply: Attach hoses to hot and/or cold water taps.
Connect drain hose: Place in sink or connect to drain pipe.
Plug into electrical outlet: Use grounded 220-240V outlet.

WARNING! Machine is heavy; use two people for handling. Ensure transit bolts are removed before operation.

First-Time Setup

Power on machine; run initial test cycle.

Connect utilities: Ensure water and power are connected properly.
Load detergent: Fill dispenser with appropriate detergent.
Select test cycle: Choose Cotton program at 60°C.
Start machine: Close door and press Start/Pause button.
Check for leaks: Monitor first few minutes for any water leakage.

CAUTION! Do not operate without removing transit bolts. Ensure machine is level to prevent vibration.

Specifications

Capacity: 7 kg dry laundry
Energy Class: A+++
Water Consumption: 50 liters per cycle average
Spin Speed: 1200 RPM maximum
Programs: Cotton, Synthetic, Delicate, Wool, Quick Wash, Rinse+Spin
Dimensions: 85cm H x 60cm W x 54cm D
Power Supply: 220-240V, 50Hz
Noise Level: 55 dB during wash, 75 dB during spin
Weight: 65 kg

Controls and Settings

Access programs via rotary dial and function buttons.

Control Panel: Power button, Program selector, Temperature button, Spin speed button, Start/Pause, Delay Start, Option buttons.

Program Selection: Rotate dial to desired program (Cotton, Synthetic, Delicate, Quick Wash, etc.). Temperature Settings: Press Temperature button to cycle through options (Cold, 30°C, 40°C, 60°C, 90°C). Spin Speed: Adjust spin speed from 400 to 1200 RPM. Additional Options: Pre-wash, Extra rinse, Delay start (1-24 hours).

Connecting Utilities

Water connections: Hot and cold water inlets. Drain: Hose for water discharge. Power: Standard electrical outlet.

Turn off water supply before connecting hoses.
Connect water inlet hoses to corresponding taps (red for hot, blue for cold).
Secure drain hose to standpipe or sink edge.
Plug power cord into grounded outlet.

Tip: Use hose clips to secure connections and prevent leaks.

Operating Wash Cycles

Follow these steps for optimal washing results.

Sort laundry: Separate by color and fabric type.
Load machine: Do not overload; leave space for movement.
Add detergent: Use appropriate amount in dispenser compartments.
Select program: Choose based on fabric type and soil level.
Set options: Adjust temperature, spin speed, and additional features.
Start cycle: Close door and press Start/Pause button.
Unload promptly: Remove laundry immediately after cycle completion.

WARNING! Do not open door during operation. Wait for door lock to release.

Safety Features

Child Lock: Press and hold Option buttons for 3 seconds to activate. Door Lock: Automatic locking during operation. Overflow Protection: Automatic shut-off if water level is too high. Unbalanced Load Detection: Adjusts spin or stops cycle if load is uneven.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean detergent dispenser monthly: Remove and rinse under running water.
Wipe door seal: Clean rubber gasket to prevent mold and odors.
Run maintenance cycle: Monthly hot wash without laundry.
Check drain filter: Clean every 3 months or as needed.
Exterior cleaning: Use damp cloth only; no abrasive cleaners.

CAUTION! Unplug machine before any maintenance. Do not use harsh chemicals.

Regulatory Information

CE certified: Complies with European safety standards. Energy efficiency compliant with EU regulations. Manufactured according to ISO 9001 quality standards. For support, visit www.kenwood.com or contact customer service at 1-800-555-KENWOOD.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power issue	Ensure door is properly closed; check power connection.
No water intake	Water supply/taps	Check water taps are open; inspect inlet hoses for kinks.
Water not draining	Drain hose/filter	Check drain hose position; clean drain filter.
Excessive vibration	Uneven load/leveling	Redistribute laundry evenly; check machine is level.
Error codes displayed	Various faults	Refer to error code chart in manual; reset machine.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-555-KENWOOD; www.kenwood.com