kenwood x700 5 manual

The Kenwood X700 5 is a high-performance audio receiver with advanced connectivity options, multi-room audio capabilities, built-in streaming services, and powerful amplification. Featuring 100W per channel output, Wi-Fi and Bluetooth connectivity, AirPlay 2, Spotify Connect, and support for high-resolution audio formats. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-power amplifier section, Network connectivity module, Multi-zone audio outputs, Remote Control, Speaker terminals, Optical/Coaxial digital inputs.

Feature	Description
Power Output	100W per channel (8 ohms, 20Hz-20kHz)
Network Connectivity	Wi-Fi 2.4GHz/5GHz, Ethernet, Bluetooth 5.0
Audio Formats	FLAC, WAV, AIFF, ALAC, MP3, WMA, AAC
Streaming Services	Spotify Connect, Tidal, Deezer, Amazon Music
Multi-Room	Zone 2 output for second room audio
Digital Inputs	Optical x2, Coaxial x2
Analog Inputs	RCA x4, Phono MM
Headphone Output	6.3mm stereo jack
USB Port	For firmware updates and media playback
Remote Control	Full-function IR remote with zone control

Installation

Unpack and inspect contents. Place on stable, well-ventilated surface.

1. Connect speakers: Use speaker wire to connect front, center, and surround speakers to appropriate terminals.
2. Connect audio sources: Use RCA cables for analog devices, optical/coaxial for digital sources.
3. Network connection: Connect Ethernet cable or set up Wi-Fi during initial setup.
4. Connect antenna: Attach FM/AM antennas for radio reception.
5. Plug into AC power.

WARNING! Ensure proper ventilation around unit; do not block ventilation slots. Use appropriate speaker wire gauge for your setup.

First-Time Setup

Power on receiver; follow on-screen display or front panel indicators.

1. Network setup: Select Wi-Fi or Ethernet connection, enter network credentials.
2. Speaker configuration: Run auto-calibration or manually set speaker distances and levels.
3. Source setup: Assign inputs to connected devices (BD, TV, GAME, etc.).
4. Streaming services: Log in to preferred streaming accounts through Kenwood Music app.
5. Radio tuning: Auto-scan for available FM/AM stations.

CAUTION! Ensure all connections are secure before powering on. Use surge protector for power connection.

Specifications

• Power Output: 100W x 5 channels (8 ohms, 20Hz-20kHz, 0.08% THD)
• Frequency Response: 10Hz-100kHz (+1dB, -3dB)
• Signal-to-Noise Ratio: 100dB (line input)
• Total Harmonic Distortion: 0.08% (rated power)
• Input Sensitivity: 200mV (line), 2.5mV (phono MM)
• Digital Inputs: Optical x2, Coaxial x2
• Analog Inputs: RCA x4, Phono MM x1
• Network: Wi-Fi (2.4GHz/5GHz), Ethernet, Bluetooth 5.0
• Power Consumption: 280W (max), 0.5W (standby)
• Dimensions: 434mm x 151mm x 329mm (W x H x D)
• Weight: 9.8kg

Controls and Settings

Access settings via front panel display or Kenwood Music app. Front Panel: POWER, INPUT SELECT, VOLUME, TONE, SPEAKERS A/B.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, TONE, SPEAKERS, ZONE 2, PRESET, DISPLAY.

Audio Settings: Bass, Treble, Balance, Loudness, Direct Mode. Speaker Settings: Distance, Level, Crossover, Impedance. Network Settings: Wi-Fi, Ethernet, Service Login, Firmware Update. System Settings: Language, Display, Auto Standby, Initial Setup.

Connecting Devices

Analog: RCA inputs for CD player, turntable, tape deck. Digital: Optical/coaxial for TV, game console, streaming box. Network: Ethernet or Wi-Fi for streaming.

1. Turn off receiver and devices before connecting.
2. Match cable types to appropriate inputs (optical to optical, etc.).
3. Assign input names in setup menu for easy identification.
4. For phono connection, use dedicated PHONO input only.

Tip: Use high-quality cables for best audio performance. Keep digital and analog cables separated to reduce interference.

Network Setup

Supports wired and wireless network connections for streaming and control.

1. Wired: Connect Ethernet cable to router and receiver.
2. Wireless: Access network settings, select Wi-Fi network, enter password.
3. App control: Download Kenwood Music app for iOS/Android.
4. Streaming services: Log in through app or web interface.
5. Firmware updates: Check for updates regularly through network connection.

WARNING! Ensure stable network connection for uninterrupted streaming. Use 5GHz band for better performance if available.

Multi-Room Audio

Zone 2 output allows audio distribution to second room.

1. Connect speakers to Zone 2 terminals.
2. Select Zone 2 source independently from main zone.
3. Control volume separately for each zone.
4. Use Kenwood Music app for multi-zone control.

Note: Zone 2 operates in stereo mode only. Some audio formats may not be available in Zone 2.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Use compressed air for ventilation slots.

CAUTION! Do not use liquid cleaners. Avoid moisture near ventilation openings. Keep in well-ventilated area.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2024 Kenwood Corporation; trademarks of JVCKENWOOD Corporation. For support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power cord connection; try different outlet; check fuse.
No sound	Speaker connections/mute	Verify speaker wire connections; check mute status; confirm input selection.
Network connection failed	Wi-Fi/router	Check network credentials; restart router; verify signal strength.
Bluetooth not pairing	Distance/interference	Move devices closer; clear paired devices list; restart both devices.
Distorted sound	Speaker impedance/settings	Check speaker impedance matches receiver; verify tone settings; reduce volume.
Remote not working	Batteries/obstacles	Replace batteries; ensure line of sight to IR sensor; check remote mode.

Reset: Press and hold POWER + TONE for 5 seconds to factory reset.

Service: 1-800-536-9663; www.kenwood.com