Kenwood X994 Manual

The Kenwood X994 is a high-performance car audio receiver featuring Bluetooth connectivity, USB input, CD playback, advanced audio controls, and compatibility with various audio formats. With built-in amplifier, customizable display, and extensive connectivity options, this unit delivers premium sound quality and user-friendly operation. Below are key sections covering features, installation, operation, settings, and troubleshooting.

Features at a Glance

Key components: Main unit with CD player, Bluetooth module, USB port, Remote Control, Wiring harness, Front panel controls.

Feature	Description
Bluetooth Connectivity	Wireless audio streaming and hands-free calling
USB Input	For connecting USB devices and charging
CD Playback	Supports CD-DA, MP3, WMA formats
Built-in Amplifier	50W x 4 channels maximum power
Display Customization	Adjustable color and brightness settings
Audio Controls	13-band equalizer, time alignment, crossover
RCA Pre-outs	Front, rear, and subwoofer outputs
Steering Wheel Control	Compatible with most steering wheel interfaces
Auxiliary Input	3.5mm jack for external audio sources
Remote Control	Included for convenient operation

Installation

Professional installation recommended. Ensure vehicle is parked with ignition off.

1. Disconnect negative battery terminal for safety.
2. Remove factory radio using appropriate tools.
3. Connect wiring harness following color-coded diagram.
4. Connect antenna cable and all input/output cables.
5. Secure unit in dashboard and test all functions.
6. Reconnect battery and perform final system check.

WARNING! Incorrect installation may damage vehicle electrical system. Use proper fuse protection.

Basic Operation

Power on unit; follow initial setup prompts.

1. Source Selection: Press SOURCE button to cycle through available inputs.
2. Volume Control: Turn knob or use remote control volume buttons.
3. Playback Controls: Use PLAY, PAUSE, SKIP buttons for media control.
4. Bluetooth Pairing: Access Bluetooth menu to pair mobile devices.
5. USB Playback: Connect USB device for music playback.

CAUTION! Avoid operating while driving. Set all controls before driving.

Specifications

• Power Output: 50W x 4 (Max), 22W x 4 (RMS)
• CD Formats: CD-DA, CD-R/RW, MP3, WMA
• USB Support: MP3, WMA, WAV, AAC files
• Bluetooth Version: 3.0 with A2DP, AVRCP
• Frequency Response: 10Hz - 20kHz
• Signal-to-Noise: 80dB
• Pre-out Voltage: 2.5V
• Display: Customizable LED with dimmer control
• Power Requirement: 12V DC, negative ground

Controls and Settings

Access settings via FUNCTION button and rotary knob. Front Panel: POWER/VOLUME, SOURCE, EJECT, FUNCTION.

Remote: POWER, Numeric buttons, SOURCE, VOLUME, MUTE, PLAY/PAUSE, SKIP, MENU.

Audio Settings: 13-band equalizer, bass boost, loudness, fader, balance. System Settings: Display color, dimmer, Bluetooth, clock, language. Source Settings: CD repeat/shuffle, USB folder play, aux input level.

Bluetooth Connectivity

Pair mobile devices for wireless audio and hands-free calling.

1. Enter Bluetooth menu from source selection.
2. Select "Pairing" and make device discoverable.
3. Select "KENWOOD X994" from device list.
4. Enter PIN if required (default: 0000).
5. Confirm connection and test audio/call functions.

Tip: Up to 5 devices can be paired; only one active at a time.

USB and Media Playback

Supports USB drives with various audio formats.

1. Connect USB device to front panel port.
2. Select USB source; unit will read device contents.
3. Navigate folders using rotary knob or remote.
4. Play files with standard transport controls.
5. Use repeat and shuffle functions as needed.

WARNING! Safely eject USB device using menu option before removal.

Audio Settings

Advanced audio customization for optimal sound quality.

• Equalizer: 13-band graphic EQ with preset curves
• Time Alignment: Adjust speaker delay for optimal staging
• Crossover: High-pass and low-pass filter settings
• Loudness: Bass enhancement at low volumes
• Balance/Fader: Adjust sound distribution

Care & Maintenance

Clean with soft, dry cloth only. Avoid chemical cleaners.

CAUTION! Do not insert foreign objects into CD slot or USB port. Keep liquids away from unit.

Regulatory Information

FCC Part 15: Class B digital device compliant. Bluetooth qualified device. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check fuse and wiring connections; verify battery connection.
Bluetooth not connecting	Pairing/range	Delete old pairings; ensure device is within range; restart both devices.
CD not playing	Disc/damage	Check disc for scratches; ensure proper format; clean lens if needed.
USB not recognized	Format/power	Use FAT32 format; ensure adequate power supply; try different USB device.
Poor sound quality	Settings/connections	Check audio settings; verify speaker connections; adjust equalizer.

Reset: Hold SOURCE button while turning power on to reset unit.

Service: Contact authorized Kenwood service center for repairs.