Kenwood X995 Manual

The Kenwood X995 is a high-performance car audio receiver featuring Bluetooth connectivity, USB input, CD playback, AM/FM tuner with 18 FM/6 AM presets, 4-channel preamp outputs, customizable display colors, advanced audio controls including high/low pass filters, and compatibility with steering wheel controls. Below are key sections for features, installation, operation, settings, and troubleshooting.

Features at a Glance

Key components: Main unit, Remote control, Wiring harness, Installation hardware, User manual.

Feature	Description
Bluetooth	Wireless audio streaming and hands-free calling
USB Input	For connecting USB devices and charging
CD Playback	Supports CD, CD-R, CD-RW formats
AM/FM Tuner	18 FM and 6 AM station presets
Preamp Outputs	4-channel (Front/Rear) for external amplifiers
Display Customization	Multiple color options and brightness control
Audio Controls	13-band EQ, high/low pass filters, time alignment
Steering Wheel Control	Compatible with most steering wheel interfaces
AUX Input	3.5mm auxiliary input for external devices
Remote Control	Full-function infrared remote included

Installation

Professional installation recommended. Ensure vehicle is parked with ignition off.

1. Disconnect negative battery terminal before beginning installation.
2. Remove factory radio using appropriate removal tools.
3. Connect wiring harness following color-coded wiring diagram.
4. Secure unit in dash using supplied mounting sleeve and brackets.
5. Reconnect battery and test all functions before final assembly.

WARNING! Incorrect installation may damage vehicle electrical system. Always fuse power connections.

Basic Operation

Power on unit; familiarize yourself with basic controls.

1. Source Selection: Press SOURCE button to cycle through available sources.
2. Volume Control: Turn knob or use remote control volume buttons.
3. Bluetooth Pairing: Enter pairing mode from Bluetooth menu.
4. CD Operation: Insert disc with label facing up; use transport controls.
5. Preset Stations: Store favorite stations in preset memory.

CAUTION! Do not operate while driving. Set all controls before driving.

Specifications

• Power Output: 22 watts RMS x 4 channels
• Preamp Outputs: 4V front and rear
• Frequency Response: 10Hz - 20kHz
• Signal-to-Noise Ratio: 95dB
• Bluetooth Version: 2.1 + EDR
• Supported Audio Formats: MP3, WMA, AAC
• Display: Dot matrix LCD with customizable colors
• Power Requirement: 12V DC negative ground
• Dimensions: DIN size (7" x 2")

Controls and Settings

Access settings via FUNCTION button and rotary knob. Front Panel: POWER/VOLUME, SOURCE, EJECT, FUNCTION.

Remote: POWER, Numeric buttons, SOURCE, VOLUME, MUTE, BAND, PRESET, PLAY/PAUSE, TRACK UP/DOWN.

Audio Settings: 13-band equalizer, bass boost, loudness, fader, balance. System Settings: Display color, dimmer, clock, Bluetooth settings. Source Settings: CD repeat/shuffle, tuner seek sensitivity.

Bluetooth Connectivity

Pair mobile devices for hands-free calling and audio streaming.

1. Enable Bluetooth on your mobile device.
2. Press FUNCTION and select Bluetooth menu.
3. Choose "Pairing" and select "KENWOOD X995" from device list.
4. Enter PIN "0000" if prompted.
5. Confirm connection on both devices.

Tip: Keep mobile device within 3 feet for optimal Bluetooth performance.

Audio Settings

Advanced audio controls for optimal sound quality.

1. Equalizer: 13-band graphic EQ with customizable presets.
2. Crossover: High-pass and low-pass filters adjustable from 50-200Hz.
3. Time Alignment: Adjust speaker delay for optimal staging.
4. Loudness: Automatic bass boost at low volume levels.
5. Balance/Fader: Adjust sound distribution between speakers.

WARNING! Excessive bass levels may damage speakers. Set crossover points appropriately.

Advanced Features

Steering Wheel Control: Program compatible interfaces for seamless integration. Display Customization: Choose from multiple colors and adjust brightness. Security: Detachable faceplate with carrying case.

Care & Maintenance

Use soft, dry cloth for cleaning. Remove faceplate when parking in unsafe areas.

CAUTION! Do not use chemicals or abrasive cleaners. Store faceplate in protective case.

Regulatory Information

FCC Part 15: Class B digital device compliant. Bluetooth qualified device. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized Kenwood service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/ignition	Check power and ground connections; verify ignition wire.
Bluetooth not connecting	Pairing/range	Delete old pairing; restart both devices; reduce distance.
CD not playing	Disc/damage	Clean disc; check for scratches; ensure proper format.
Poor radio reception	Antenna/connection	Ensure antenna connected; check antenna amplifier power.
No sound from speakers	Wiring/settings	Check speaker wires; verify fader/balance settings.

Reset: Hold FUNCTION + EJECT for 5 seconds to reset unit.

Service: Contact authorized Kenwood service center for repairs.