manual estereo kenwood kdc-mp205

The Kenwood KDC-MP205 is a single-DIN car stereo with CD/MP3/WMA playback, built-in amplifier, detachable faceplate security, AM/FM tuner with 18 presets, front auxiliary input, ID3 tag display, loudness control, and rotary volume knob. Features include high-power output, bass boost, adjustable sound settings, and compatibility with various audio formats. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Security Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with CD/MP3 player, Remote Control, Detachable faceplate, Front AUX input, AM/FM antenna connector, Speaker outputs, Power connector.

Feature	Description
CD/MP3/WMA playback	Plays audio CDs and compressed audio files
AM/FM tuner	18 station presets (6 AM, 12 FM)
Front AUX input	For external audio devices (MP3 players, phones)
Detachable faceplate	Security feature to prevent theft
Rotary volume knob	Easy volume adjustment
ID3 tag display	Shows song title and artist information
Loudness control	Enhances bass at low volume levels
Bass boost	Amplifies low-frequency response
Power output	50W x 4 channels maximum
Audio adjustments	Bass, treble, balance, fader controls

Installation

Unpack and inspect contents. Ensure vehicle is turned off during installation.

Disconnect vehicle battery: Remove negative terminal for safety.
Remove existing stereo: Use removal tools if available.
Connect wiring harness: Match color-coded wires (power, ground, speakers).
Connect antenna: Plug in AM/FM antenna cable.
Mount unit: Secure in dashboard opening.
Reconnect battery and test functions.

WARNING! Disconnect battery before installation to prevent electrical shorts. Ensure all connections are secure.

First-Time Setup

Power on unit; follow initial setup procedures.

Set clock: Press and hold CLOCK button, adjust time with rotary knob.
Program radio stations: Tune to desired station, press and hold preset button.
Adjust sound settings: Use BASS, TREBLE, BALANCE, FADER controls.
Set loudness: Enable/disable in audio menu for bass enhancement.
Detach faceplate: Practice removal for security when parking.

CAUTION! Ensure proper wiring connections to avoid electrical issues.

Specifications

Chassis Size: Single-DIN (50mm x 180mm)
Power Output: 50W x 4 max (22W RMS)
Supported Media: CD, CD-R, CD-RW, MP3, WMA
Tuner Sensitivity: FM 10.3 dBf, AM 25 µV
Frequency Response: 10Hz - 20,000Hz
Signal-to-Noise Ratio: 95 dB (CD)
Separation: 55 dB
Power Requirement: 12V DC, negative ground
Dimensions: 178mm(W) x 50mm(H) x 160mm(D)

Controls and Settings

Front Panel: POWER/VOLUME knob, SOURCE button, BAND button, AUDIO button, Number buttons, EJECT button.

Remote: POWER, Volume up/down, Track up/down, Preset up/down, MUTE, BAND, AUDIO.

Audio Settings: BASS (-6 to +6), TREBLE (-6 to +6), BALANCE (L9 to R9), FADER (F9 to R9). Tuner: Manual tuning, Seek tuning, 18 presets. Playback: Repeat, Random, Scan modes. Display: Dimmer control, ID3 tag display.

Connecting Devices

AUX Input: Front 3.5mm jack for external audio devices. Speakers: 4-channel output.

Turn off vehicle and stereo before connecting devices.
Connect external device to front AUX input using 3.5mm cable.
Select AUX source by pressing SOURCE button repeatedly.
Adjust volume on both device and stereo for optimal sound.

Tip: Use quality audio cables for best sound quality from external devices.

Playing Media

Supports audio CDs, MP3/WMA CDs.

Insert disc: Press EJECT, load media label-side up.
Play: Unit auto-plays; use track buttons for navigation.
Stop: Press EJECT to stop and remove disc.
Skip: TRACK UP/DOWN for next/previous tracks.
Random: Press RANDOM during play for shuffle mode.
Repeat: Press REPEAT for track or folder repeat.
Scan: Press SCAN to sample each track briefly.
MP3 navigation: Use folder buttons to navigate directories.

WARNING! Do not use damaged or cracked discs. Keep discs clean and free of scratches.

Security Features

Detachable Faceplate: Remove when parking to deter theft. Security Code: Optional code can be set to prevent unauthorized use.

Care & Cleaning

Use soft, dry cloth for cleaning. For stubborn stains, dampen cloth slightly with water. Do not use chemicals or abrasives.

CAUTION! Never spray liquids directly on unit. Store faceplate in protective case when detached.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for vehicle use. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized Kenwood service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check power connections; verify fuse in vehicle and unit; ensure battery connected.
No sound	Speaker connections	Verify speaker wires connected properly; check balance/fader settings.
CD won't play	Disc/format	Ensure disc is clean; verify format compatibility; try different disc.
Poor radio reception	Antenna connection	Check antenna cable connection; ensure antenna fully extended.
Unit won't eject disc	Mechanical issue	Use manual eject tool (small hole near eject button).

Reset: Disconnect power for 5 minutes to reset unit.

Service: Contact authorized Kenwood service center for repairs.